RFWEL
⌂›Forum›Wireless Communication›Wireless Links & Wireless Ethernet Bridges›ConnectGear WA620G as a Repeater?
The RFWEL Forums are now archived. All threads and discussions are preserved here for reference. New posts, replies, and comments are no longer accepted. For support or enquiries, please visit our Knowledge Base or Contact Us.

ConnectGear WA620G as a Repeater?

This thread is part of the RFWEL Forums Archive. It is preserved here for reference and is no longer open for new replies or comments.
⌕
Pageof 1‹›⌗ Filter ▾
T
Tammi08
New Member
Join Date: Jun 2008
Posts: 7
06-23-2008, 01:28 PM
#1

Can the ConnectGear WA620G WL Wireless Access Point be used as a repeater station, in conjunction with another manufacturer's wireless access point? (E.g., If I'm using a Linksys WRT54G for the broadband internet access point, can I use this WA620G as a stand alone repeater station to pick up the wireless signal and rebroadcast it in order to expand my network range within a complex of buildings?)

Thanks.

Tags: None
P
phillipsl
New Member
Join Date: Oct 2007
Posts: 14
06-23-2008, 01:33 PM
#2

Yes it can.

We also have higher performance, longer range units to implement point-to-point or point-to-multipoint bridging applications such as these. One example that is very popular is the Avalan Pt-Mp outdoor bridge here: which uses 900MHz for better obstacle penetration and may be combined with high gain directional antennas for even more range.

Let us know if you have any additional questions or require further clarification.

Tags: None