RFWEL
⌂›Forum›Wireless Communication›Top Global MBxxx Mobile Router (MB9000/MB8000/6000/6800…)›Configuring MB6000 to work with cingular
The RFWEL Forums are now archived. All threads and discussions are preserved here for reference. New posts, replies, and comments are no longer accepted. For support or enquiries, please visit our Knowledge Base or Contact Us.

Configuring MB6000 to work with cingular

This thread is part of the RFWEL Forums Archive. It is preserved here for reference and is no longer open for new replies or comments.
⌕
Pageof 1‹›⌗ Filter ▾
T
thuor
Wireless Support
Join Date: Oct 2006
Posts: 395
02-26-2007, 02:32 PM
#1
Here's an application note from TopGlobal on how to configure the MB6000 to work with a Cingular card. Note that Cingular is only supported with firmware versions 1.1.16 and above:
Attached Files
Tags: None
T
tags4u
New Member
Join Date: Jul 2007
Posts: 2
07-13-2007, 03:34 PM
#2
Sierra wireless ac860 issue

it's blinking red when i connect to the phoebus mb6000 router .. can someone pls help - Cingular will not help me
Tags: None
T
thuor
Wireless Support
Join Date: Oct 2006
Posts: 395
07-13-2007, 03:43 PM
#3
Cingular/ AT&T Sierrra AC860 and TopGlobal MB6000

Originally posted by tags4u
it's blinking red when i connect to the phoebus mb6000 router .. can someone pls help - Cingular will not help me
That's exactly why it helps to get both from people like us since we will support both ... it's actually a common frustrating problem where the mobile router manufacturer will not debug connection card issues and the cellular carrier support will not debug mobile router issues.

Check this post for connection issues: http://www.rfwel.com/forums/showthre...?p=436#post436
Tags: None