D
New Member
Join Date: Apr 2009
Posts: 1
04-01-2009, 09:55 AM
#1What is the ground plane requirement for a magnet mount antenna for use in-building? In vehicles I can mount on the roof but what to do in a building?
Tags: None
⌂›Forum›Amplifiers and Repeaters›Cellular Band Amplifiers and High Gain Booster Antennas›ground plane requirement
The RFWEL Forums are now archived. All threads and discussions are preserved here for reference. New posts, replies, and comments are no longer accepted. For support or enquiries, please visit our Knowledge Base or Contact Us.
ground plane requirement
This thread is part of the RFWEL Forums Archive. It is preserved here for reference and is no longer open for new replies or comments.
⌕
Pageof 1‹›⌗ Filter ▾desi2009
T
Wireless Support
Join Date: Oct 2006
Posts: 395
04-01-2009, 11:50 AM
#2This antenna requires a small metallic ground plane — anything metallic even a tin can. Largest wavelength at 800MHz is about 37cm; need a ground plane of about 9cm diameter (~3.6 inches).
KF7RCQ
Tags: None