Announcement

Collapse
No announcement yet.

Option Globesurfer III workaround if only working on EDGE

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Option Globesurfer III workaround if only working on EDGE

    We have some units of the Globesurfer III that are only working on EDGE and not UMTS/HSDPA. Here is a workaround to this that we got from Option support:

    Check the default value for the rrc_release_version:

    1) Telnet the GS3 : Start=>Run=>type in cmd, then enter,
    in the window, type in telnet 192.168.1.1
    2) type in user: admin (default ) unless customer changed it.
    3) type in password: admin (default) unless customer changed it.
    3) And then, type in this command => conf print /modem/rrc_release_version


    If the answer for that command is: rrc_release_version(2), then you should put this command and retest:

    1) Telnet the GS3 as before
    2) type in this commands:
    conf set /modem/rrc_release_version 3
    conf reconf 1
    system reboot
    KF7RCQ
Working...
X
😀
🥰
🤢
😎
😡
👍
👎